To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Kms 400 and is the answer not in the manual?
General| Mains Frequency | 50/60 Hz |
|---|---|
| Welding Process | MIG/MAG |
| Rated Output at 40°C | 400 A |
| Duty Cycle at 40°C | 60 % |
| No-Load Voltage | 68 V |
| Protection Class | IP23 |
Overview of the operating manual's purpose, content, and safety advice.
Introduction to the FastMig KMS power sources and their intended applications.
Details on machine controls, connectors, indicator lamps, and their functions.
Description of available remote control devices for welding current adjustment.
Information on various cables for remote control, earth, and welding connections.
Guidelines for optimal placement of the welding machine for safety and airflow.
Information regarding the electrical distribution network compatibility and requirements.
Instructions for safely connecting the FastMig KMS to the mains power supply.
Recommended copper cable cross-sections and load capacities for welding.
Explanation of the main power switch operation and status indicator lamps.
Details on the operation and function of the machine's cooling fans.
Daily checks and safety recommendations for welding and connection cables.
Maintenance checks for the power source, including connectors and cleaning.
Overview of regular maintenance procedures performed by authorized service workshops.
Explanation of the overload protection and its indicator lamp.
Information about the control fuses and their protection function.
How the machine handles under/overvoltages and phase loss in the mains supply.
