To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Kempomat 2501 and is the answer not in the manual?
Conditions and exclusions that void the product guarantee.
Duration of the warranty based on usage shifts.
Process for claiming and performing warranty repairs.
Product codes and identification for Kempomat welding machines.
Product codes for compatible MIG welding guns.
Product codes for various return current cable specifications.
Guidelines for safely moving and lifting the welding machine.
Recommendations for placing the machine in a suitable operating environment.
Instructions for connecting the welding machine to the electrical power source.
Steps for correctly installing and securing the main power cable.
Details on wire feed rolls and guide tubes for different wire types.
Instructions for attaching and connecting the MIG welding gun.
Procedure for installing and securing the wire spool onto the feeder.
Explanation of the automatic wire feeding mechanism and setup.
Instructions for connecting and using the gas flow regulator.
Operation of the main power switch and its functions.
How to adjust welding voltage using the machine's controls.
Interpretation of the indicator lights on the power source.
Location and function of the control fuse for protection.
How to set the arc force for different welding applications.
Using the potentiometer to control wire feed speed.
Understanding and adjusting the burn back time setting.
Function of the wire inch switch for manual wire feeding.
Explanation of the KMW timer and its welding sequence functions.
How to use the 2 and 4-sequence welding procedures.
Settings and operation for spot, cycle, and continuous welding modes.
Common wire feed problems and their causes.
Procedures for cleaning dust and debris from the welding machine.
Checks and maintenance for welding and connection cables.
Maintenance checks for the power source, including electrical connections.
General| Welding process | MIG/MAG |
|---|---|
| Output current | 250 A |
| Duty cycle | 60% at 250 A |
| Protection Class | IP23 |
| Input voltage | 3~ 50/60 Hz 400 V ±15% |
