Need help?Do you have a question about the Kemppi KEMPOMAT 163 S and is the answer not in the manual?
General| Wire diameter | 0.6-1.0 mm |
|---|---|
| Output at 35 % duty cycle | 160 A |
| Output at 60 % duty cycle | 130 A |
| Output at 100 % duty cycle | 100 A |
| Wire material | Steel, stainless steel, aluminum |
| Standards | EN 60974-1, EN 60974-10 |
Essential specifications for voltage, current, wire feed, dimensions, and gas types.
Procedures for machine placement, electrical connection, voltage, and gas setup.
How to connect the power cable to the machine terminals.
Attaching the torch and loading wire for operation.
How to adjust settings like voltage, wire feed, and welding method.
Adjusting voltage and wire speed for optimal welding.
Choosing between continuous, interval, or spot welding.
Explanations of continuous, interval, and spot welding techniques.
Standard welding with constant wire feed.
Welding with timed wire feed cycles.
Using the machine for metal straightening with heat.
Procedures for servicing components like the torch, wire feed, and power source.
Care for the welding torch parts.
Maintaining the wire feeding system.
Terms and conditions of the product warranty.
To Next Page