Need help?Do you have a question about the Kemppi KEMPOWELD 5500W and is the answer not in the manual?
General| Welding process | MMA |
|---|---|
| Input voltage | 3 x 400 V |
| Welding current range (MMA) | 550 A |
| Operating temperature range | +40 °C |
| External dimensions L x W x H | 700 mm |
| Protection class | IP23 |
| Standards | IEC 60974-1, IEC 60974-10 |
| Duty Cycle | 40 % |
Covers essential safety precautions for operating the welding equipment.
Identifies and describes the main controls and connectors on the power source front panel.
Provides instructions for safely moving and lifting the welding equipment.
Guides on proper placement of the machine for optimal cooling and operation.
Details how to safely connect the machine to the electrical mains supply.
Specifies requirements for welding and return current cables.
Explains the main switch and how to adjust welding voltage.
Presents detailed technical specifications for the Kempoweld models.
To Next Page