Need help?Do you have a question about the Kemppi KEMPOMAT 181 S and is the answer not in the manual?
Details on how to connect the power supply cable to the machine.
Guidance on setting up the wire feed mechanism and selecting wire diameters.
Adjustment of wire feed speed for welding.
Setting the duration for pulse or spot welding operations.
Information on the main power switch and voltage selection for welding.
Switching between different welding methods.
Details on connecting the welding torch and ground cable.
Setting the maximum limit for wire feed speed.
Regulation of post-weld current and gas flow.
Setting the duration of pauses during welding cycles.
Maximum adjustment for cycle or spot welding time.
Identification and function of key internal components like transformers and motors.
Details on how to connect the power supply cable to the machine.
Guidance on setting up the wire feed mechanism and selecting wire diameters.
Adjustment of wire feed speed for welding.
Setting the duration for pulse or spot welding operations.
Information on the main power switch and voltage selection for welding.
Switching between different welding methods.
Details on connecting the welding torch and ground cable.
Setting the maximum limit for wire feed speed.
Regulation of post-weld current and gas flow.
Setting the duration of pauses during welding cycles.
Maximum adjustment for cycle or spot welding time.
Identification and function of key internal components like transformers and motors.
General| Input Voltage | 230 V |
|---|---|
| Weight | 44 kg |
| Dimensions | 620 x 390 x 720 mm |
| Welding Process | MIG/MAG |
| Wire Diameter | 0.6 - 1.0 mm |
| Protection Class | IP21S |
| Duty Cycle | 60 % |
| Power Supply | Single Phase |
To Next Page