To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Master S 400 and is the answer not in the manual?
General| Output @ 40 % ED | 400 A / 36 V |
|---|---|
| Weight | 26 kg |
| Cooling Type | Forced air |
| Degree of protection | IP23S |
| Efficiency | 89% |
| Power Factor | 0.93 |
| Welding Processes | MMA, TIG |
| Input Voltage | 3~ 380 V - 440 V |
| Connection voltage 50/60 Hz | 3~ 380 V - 440 V ±10% |
| Output Current Range | 400 A |
| Output Voltage Range | 36 V |
| Output @ 100 % ED | 250 A |
| Duty Cycle | 40 % @ 400 A |
| Welding current range (MMA) | 400 A |
| Welding current range (TIG) | 5 - 400 A |
| Operating temperature range | -20°C to +40°C |
| Standards | IEC 60974-1, IEC 60974-10 |
Requirements for connecting the machine to the electrical distribution network.
Explanation of power source, control panel, and setup functions.
Guide to activating and adjusting machine parameters via the setup menu.
Step-by-step guide for performing manual metal arc welding.
Procedures for routine maintenance tasks to ensure machine longevity.
Common issues and solutions for problems encountered during operation.
Explanation of error codes displayed on the control panel and their meanings.
Specifications and performance data for the Master S 400 and 500 models.
