To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Master S 500 and is the answer not in the manual?
General information about the Master S series power source and its benefits.
Overview of Master S welding machines, their functions, and model variations.
Identification and description of the components on the Master S 400 and 500 control panel.
Pre-use checks, packaging, handling, and operating environment guidelines.
Guidelines for placing the welding machine on a suitable surface and ensuring proper airflow.
Requirements for connecting the machine to the power supply network regarding harmonic currents.
Instructions for connecting welding and earth return cables for MMA and TIG welding.
Overview of available welding processes like MMA and TIG welding.
Details on power source functions and control panel operations.
Instructions and parameters for performing Manual Metal Arc welding.
Guidelines and procedures for Gas Tungsten Arc welding.
Procedures for carbon arc gouging and using the wireless remote control.
Guidelines for periodic maintenance operations and frequency.
Information on service contracts and proper storage conditions.
Environmental guidelines for the responsible disposal of electrical equipment.
Troubleshooting common problems like no power or poor welding performance.
Explanation of control panel error codes and their corresponding solutions.
General information about the Master S series power source and its benefits.
Overview of Master S welding machines, their functions, and model variations.
Identification and description of the components on the Master S 400 and 500 control panel.
Pre-use checks, packaging, handling, and operating environment guidelines.
Guidelines for placing the welding machine on a suitable surface and ensuring proper airflow.
Requirements for connecting the machine to the power supply network regarding harmonic currents.
Instructions for connecting welding and earth return cables for MMA and TIG welding.
Overview of available welding processes like MMA and TIG welding.
Details on power source functions and control panel operations.
Instructions and parameters for performing Manual Metal Arc welding.
Guidelines and procedures for Gas Tungsten Arc welding.
Procedures for carbon arc gouging and using the wireless remote control.
Guidelines for periodic maintenance operations and frequency.
Information on service contracts and proper storage conditions.
Environmental guidelines for the responsible disposal of electrical equipment.
Troubleshooting common problems like no power or poor welding performance.
Explanation of control panel error codes and their corresponding solutions.
General| Input Voltage | 3 x 400 V |
|---|---|
| Output @ 40 % ED | 500 A |
| Output @ 60 % ED | 400 A |
| Output @ 100 % ED | 300 A |
| Welding Voltage Range | 10 - 40 V |
| Protection Class | IP23 |
| EMC Standard | EN 60974-10 |
| Cooling Method | Forced air |
| Operating Temperature Range | -20 to +40 °C |
| Standards | EN 60974-1 |
