To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Master MLS 2500 and is the answer not in the manual?
General| Power Supply | Mains |
|---|---|
| Duty Cycle MMA | 60% at 250 A |
| Duty Cycle TIG | 60% at 250 A |
| Protection Class | IP23 |
| Welding Processes | MMA, TIG |
| Duty Cycle | 60% |
| Open Circuit Voltage | 70 V |
| Output Current Range | 10 - 250 A |
General information about the manual and safety precautions for Kemppi products.
Overview of Master MLS and MasterTig MLS welding systems and their components.
Instructions for checking equipment and packaging after delivery.
Guidelines for placing the machine in a suitable environment for operation.
Information on locating the machine's serial number for identification.
Visual guide and labels for machine installation and connection points.
Step-by-step instructions for attaching the function panel to the power source.
Information on harmonic currents and compliance with IEC 61000-3-12.
Safety notes and requirements for connecting the mains cable by an electrician.
Details on connecting welding cables and choosing polarity.
Instructions for connecting the MasterCool 10 cooling unit and filling with coolant.
Guidelines for using inert gases for TIG welding and setting gas flow rate.
Detailed steps for installing a gas bottle and connecting the gas flow regulator.
Overview of available welding processes including MMA and TIG.
Overview of various operational functions and controls for the welding machine.
Overview of the MEL panel for MMA welding, including controls and display.
Description of the MEX panel for MMA welding, its indicator lights, and functions.
Details on the MTL panel for TIG welding, including basic functions and parameter settings.
Description of the MTX panel for pulsed TIG welding and its functions.
Explanation of the MTZ panel for pulsed TIG and MINILOG operations.
Details on the MTM panel for pulsed TIG, MINILOG, and memory functions.
Procedure for saving welding parameters in the MTM panel's memory channels.
Steps to retrieve and apply saved welding settings from memory channels.
How to select memory channels using remote control and CH button.
Guide to accessing and modifying panel functions using the SETUP state.
Instructions for installing and using the R11F foot pedal for TIG welding control.
Steps for operating the MasterCool 10 cooling unit and understanding its indicators.
Guidelines for storing the welding machine in a suitable environment.
Procedures for routine maintenance tasks to ensure machine longevity.
Specific maintenance checks and cleaning to be performed every six months.
Information on Kemppi service contracts for professional maintenance.
Common issues and solutions for power, welding, and overheating problems.
Environmental guidelines for the proper disposal of electrical equipment.
List of part numbers for Master MLS 2500 welding cables and accessories.
List of part numbers for Master MLS 3500 welding cables and accessories.
List of part numbers for MasterTig MLS 3000 torches and accessories.
List of part numbers for MasterTig MLS 4000 torches and accessories.
List of part numbers for MasterCool 10 water-cooled torches.
Part numbers for different control panels (MEL, MEX, MTL, MTX, MTZ, MTM).
Part numbers for optional devices like remote controls and torch controls.
Part numbers for transport units for the welding machines.
Technical specifications for the Master MLS 2500 power source.
Technical specifications for the Master MLS 3500 power source.
Technical specifications for the MasterTig MLS 3000 power source.
Technical specifications for the MasterTig MLS 4000 power source.
Technical specifications for the MasterCool 10 cooling unit.
