Need help?Do you have a question about the Kemppi M 420MV FastMig and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Power Supply Voltage | 3 x 400 V |
| Protection Class | IP 23 |
| Welding Processes | MIG/MAG |
| Duty Cycle | 60% at 420 A |
| Wire Diameter Range | 0.8 - 1.6 mm |
General information about the welding equipment and manual contents.
Details concerning the FastMig M 420MV welding power source.
Description and diagram of the machine's operation controls and connectors.
Overview of available accessories for the welding equipment.
Details on R10 and R20 remote control devices for welding.
Information on various cables used with the welding equipment, including diagrams.
Guidelines for placing the welding machine in a suitable location.
Information on electrical network requirements for the welding equipment.
Instructions for connecting the machine to the mains power supply.
Recommendations for copper cables and their cross-sectional areas.
Explanation of the main power switch and its operation.
Description of pilot lamps indicating machine status and thermal protection.
Details on the operation of the machine's cooling fans.
Instructions for electrode welding setup with wire feeders or remote controls.
Routine checks and cleaning procedures for daily operation.
Scheduled maintenance tasks to be performed by qualified personnel.
Details on maintenance procedures carried out by authorized service workshops.
Guidance for addressing common malfunctions and basic troubleshooting steps.
Explanation of the thermal overload protection and yellow warning lamp.
Information regarding the 6.3 A delayed fuse for auxiliary devices.
Handling of under/over voltages and loss of phase in the mains supply.
Guidelines for environmentally responsible disposal of electrical equipment.
List of available wire feeder models and their part numbers.
List of wire feeder panel models and their part numbers.
List of accessories, their descriptions, and corresponding part numbers.
Detailed electrical parameters including voltage, power, and current ratings.
Data on output, efficiency, power factor, and operating ranges.
Information on operating/storage temperatures, protection class, dimensions, and weight.
To Next Page