Kemppi MinarcTig Evo 200 User Manual

Operating manual
Käyttöohje
Bruksanvisning
Bruksanvisning
Brugsanvisning
Gebrauchsanweisung
Gebruiksaanwijzing
Manuel d’utilisation
Manual de instrucciones
Instrukcja obsługi
Инструкции по эксплуатации
Manual de utilização
Manuale d’uso
EN
FI
SV
NO
DA
DE
NL
FR
ES
PL
RU
PT
IT
MinarcTig
Evo 200, 200MLP

Kemppi MinarcTig Evo 200 Specifications

General

Input Voltage	230 V
Protection Class	IP23
Power Factor	0.99
Welding Process	TIG, MMA
Duty Cycle TIG	35% at 200 A
Standards	IEC 60974-1, IEC 60974-10

Summary

Preface

General Information

General information about the MinarcTig Evo equipment and the operating manual.

Product Introduction

Overview of MinarcTig Evo machines, their features, and applications in industry.

Before You Start Using The Unit

Unpacking and Environment Setup

Instructions for unpacking, transportation, and suitable environmental conditions for the machine.

Positioning and Location Guidelines

Guidelines for placing the machine on a firm, dry, and level surface for proper operation.

Distribution Network Compliance

Information on harmonic currents and compliance with IEC 61000-3-12.

Serial Number Identification

Location and importance of the serial number for identification and service.

Machine Components Overview

Labeled diagram identifying the main components and connections of the welding machine.

Connecting Cables and Power

Detailed instructions for connecting the mains power, earthing cable, and welding torch.

Using the Welding Machine

Understanding Welding Principles

Explanation of the precise welding tool and factors influencing welding quality.

Manual Metal Arc (MMA) Welding

Details on MMA welding process, electrode types, and current settings.

TIG Welding Process

Explanation of TIG process, gas requirements, and electrode preparation.

Welding Current Regulation and Remote Control

How to adjust welding current using panel controls or optional remote devices.

MMA Welding Settings

Automatic settings for MMA process, including ignition time and arc dynamics.

TIG Welding Functions

Details on TIG torch switch control (2T/4T) and HF/Contact ignition methods.

Using the Shoulder Strap

Instructions for attaching and using the shoulder strap for convenient machine transport.

Additional MLP Model Features

Explanation of Minilog and Pulse welding features specific to MLP models.

Setup Features Configuration

Parameter Settings and Options

Lists and explains available setup parameters, their values, and factory settings.

Error Codes and Troubleshooting

Troubleshooting Common Issues

Common problems, their causes, and solutions for the welding machine.

Maintenance and Care

Daily Maintenance Procedures

Recommended daily checks and cleaning procedures for the welding machine.

Storage Guidelines

Instructions for storing the welding machine in a safe and dry environment.

Disposal of the Machine

Information on the environmentally responsible disposal of electrical equipment.

Ordering Numbers

Technical Data Specifications