EN
3.5 Using the shoulder strap
1.
3.
2.
4.
Using and xing the shoulder strap
The machine is delivered with a fabric shoulder strap and metal clip set. The shoulder strap
can be used as a convenient and comfortable way to transport both the machine and cables
set. There are two identical metal clips. Fix one clip to each of the metal lifting eyes, located at
the top of the machine. Adjust the shoulder strap to a comfortable length. The machine can
now be carried.
Should you also wish to transport and secure the cables set, place the cable bundle over the
strap as shown, bring the strap and remaining free clip over the top of the cable bundle and
secure to the already fastened clip. As you take the weight of the machine with the strap, the
cable set is clamped securely into position ready for transport.
NOTE! The machine should not be used when hanging from the shoulder strap.
MinarcTig Evo 200, 200MLP
12
To Next Page
Loading...
Need help?
General
