To Next PageTo Next Page
Need help?Do you have a question about the Kemppi Evo 150, 150VRD and is the answer not in the manual?
General| Brand | Kemppi |
|---|---|
| Model | Evo 150, 150VRD |
| Category | Welding System |
| Language | English |
Provides general information about the welding equipment and safety.
Introduces the Minarc Evo welding apparatus and its applications.
Instructions for checking equipment for damage and receiving it correctly.
Guidelines for placing the machine safely and ensuring proper ventilation.
Information regarding power supply compatibility and harmonic currents.
Location and importance of the serial number for tracking and service.
Illustrates the different parts of the welding apparatus with numbered labels.
Details on connecting primary cables, extension cables, and ground cables.
Explanation of the control panel, indicators, and process selection buttons.
Steps and safety precautions before starting welding operations.
How to perform MMA welding using coated electrodes.
Guidance on selecting electrodes and ensuring correct setup for MMA welding.
Proper connection and placement of the ground cable and clamp for welding.
Step-by-step instructions for setting parameters and performing MMA welding.
Introduction to TIG welding capabilities and required accessories.
Steps for setting up and performing DC TIG welding.
Instructions for connecting the ground cable and clamp for TIG welding.
Detailed explanation of the TIG welding process with tungsten electrodes and shielding gas.
Instructions on how to attach and use the shoulder strap for carrying the apparatus.
Daily checks and cleaning procedures for the welding equipment.
Identifies common problems, their causes, and solutions.
Guidelines for storing the welding apparatus in suitable conditions.
Information on the proper and environmentally friendly disposal of the machine.
