Kendro HERAsafe KS 15 User Manual (English)

To Next Page

Safety Cabinet HERAsafe KS / KSP

Service Instructions

Valid: 12.2004 / 50077494 C

Default Chapter3
- Table of Contents3
1 General Notes8
- Safety Instructions for Service Work8
- Warranty9
- Explanation of Symbols9
- Safety Instructions for Repairs12
- Standards and Safety Regulations14
2 Tools and Auxiliaries15
- Auxiliaries15
- List of Required Tools15
3 Accessories16
- Exhaust System Accessories16
- Installing Exhaust System Accessories16
- Fig. 1 Exhaust System Accessories16
  - Exhaust System Accessories for Disinfection17
- Fig. 2 Exhaust System Accessories for Disinfection17
- Fig. 3-B Installing the Electrical KS Rack19
  - Fig. 3-C Device Stands19
  - Drain Valve (Optional)20
- Fig. 4 Drain Valve Installation20
4 Media Connections21
- Installation Points for Media Valves (Optional) at the Sample Chamber Rear Panel21
- Fig. 5 Installation Points at the Rear Panel21
  - Installation Points at the Sample Chamber Sidewalls22
- Fig. 6 Installation Points at the Sidewall22
  - Installing Media Valves23
- Fig. 7 Media Valve Installation at the Rear Panel23
- Fig. 8 Media Valve Installation at the Sidewall24
5 Lamps25
- Replacing the Luminescent Tubes25
- Replacing the Luminescent Tube Sockets25
- Fig. 9 Luminescent Tube and Socket Replacement25
  - Replacing the Illumination Power Supply Unit26
  - Replacing UV Lamps26
- Fig. 10 Illumination Power Supply Unit Replacement26
- Fig. 11 UV Lamp Replacement26
  - Replacing the UV Lamp Power Supply Unit27
- Fig. 12 UV Lamp Power Supply Unit Replacement27
6 Internal Outlets28
- Replacing Outlets for Accessories28
- Replacing the Disinfection Adapter28
- Fig. 13 Internal Outlet Replacement28
7 Display Panel29
- Replacing the Display Panel Foil29
- Replacing the Display Panel29
- Fig. 14 Display Panel Foil Replacement29
  - Replacing the Keyboard Foil30
  - Replacing the Pilot Switch30
- Fig. 15 Keyboard Foil Replacement30
- Fig. 16 Pilot Switch Replacement30
8 Side Window31
- Replacing the Side Window31
- Fig. 17 Side Window Replacement31
9 Filter Components32
- Filter Application32
- Installing/Removing the Perforated Panel (Filter Protection)33
- Removing/Installing the Plenum Cover33
- Fig. 18 Perforated Panel (Filter Protection) Installation33
- Fig. 19 Plenum Cover33
  - Replacing the Inlet Protection (Applications in EU / EMEA Only)34
- Fig. 20 Coarse Filter Replacement34
  - Replacing the Exhaust Filter35
- Fig. 21 Exhaust Filter Replacement35
  - Replacing the Downflow Filter36
  - Replacing the Prefilter36
- Fig. 22 Downflow Filter Replacement36
- Fig. 23 Prefilter Replacement37
10 Blowers38
- Replacing the Exhaust Blower38
- Fig. 24 Exhaust Blower Replacement38
  - Replacing the Downflow Blower39
- Fig. 25 Downflow Blower Replacement39
11 Pressure Sensors40
- Replacing Pressure Sensors40
- Fig. 26 Pressure Sensor Replacement40
12 Front Door Components41
- Replacing the Front Door Assembly41
- Fig. 27 Front Door Hinge41
- Fig. 28 Hinge Bolt Removal42
  - Replacing the Gas Struts43
  - Replacing the Front Door Seal43
- Fig. 29 Gas Strut Removal43
- Fig. 30 Front Door Seal Replacement43
  - Replacing the Front Frame Latch44
  - Replacing the Safety Locks44
- Fig. 31 Front Frame Latch44
- Fig. 32 Safety Locks44
  - Replacing the Front Window45
- Fig. 33 Remove Front Window45
- Fig. 34 Cable Retainers45
  - Adjusting the Front Window46
- Fig. 35 Window Drive Mounting Bracket46
  - Adjusting the Switch Points47
- Fig. 36 Position Switches47
  - Replacing the Front Window Drive48
- Fig. 37 Window Drive Replacement48
  - Replacing the Front Window Safety Feature Battery49
- Fig. 38 Battery/ Connecting Cable49
13 Control Box Components50
- Replacing Control Box Electrical Components50
- Fig. 39 Control Box Electrical Components50
  - Connecting the Alarm Contact51
- Fig. 40 Contact Function51
- Fig. 41 Example for External Connection51
14 Device Control Programming52
- Setting the Remote Control52
- Program Structure52
- Fig. 42 Remote Control IR Address Setting52
  - Service Level53
    - Service Level Overview53
    - Service Level Settings55
- Fig. 43 Service Level Display55
  - Parameter Levels57
    - Parameter Level Overview57
    - Parameter Level Settings59
- Fig. 44 Parameter Level Display59
  - Configuring the Switching States of a Device Control61
  - Disinfection Level63
    - Disinfection Level Overview63
    - Disinfection Level Settings64
- Fig. 45 Disinfection Level Display64
15 Auto-Calibration Routine66
- Function of the Auto-Calibration Routine66
- Starting the Auto-Calibration Routine66
- Automatic Interruption of the Auto-Calibration Routine67
- Manual Interruption of the Auto-Calibration Routine67
- Manual Abortion of the Auto-Calibration Routine67
- Manual Start of the Auto-Calibration Routine68
- Failures Upon Starting the Auto-Calibration Routine68
Installation Test / Repeat Test69
- Classification of the Safety Cabinet69
- Test Terms69
- Extent of the Tests70
- Testing Equipment70
  - 4.1 Manufacturers in USA70
  - Manufacturers in Europe71
  - A.4.2 Manufacturers in Europe71
- Electrical Safety Test72
- HEPA Filter Leakage Test74
- Fig. a 1 HEPA Filter Leakage Test75
  - Prefilter Element Leakage Test76
- Fig. a 2 Inflow Velocity Test Arrangement NSF 4977
- Fig. a 3 Inflow Air Volume Test78
  - Inflow Velocity Test80
    - Alternative Measurement of the Inflow Velocity in the Work Aperture (NSF 49)80
- Fig. a 4 Test Grid above the Exhaust Aperture80
  - Alternative Measurement of the Inflow Velocity in the Work Aperture (en 12469)82
- Fig. a 4A Inflow Velocity Test Arrangement82
  - The Work Aperture (NSF 49)83
- Fig. a 5 Inflow Air Volume Test83
  - Calculating the Inflow Velocity (en 12469)84
- Test Grid above the Exhaust Aperture85
  - Exhaust Airflow Volume Test86
  - Downflow Velocity Test87
    - Test in Accordance with NSF 49, Annex F87
- Fig. a 7 Downflow Velocity Test Arrangement in Accordance with NSF 49, Annex a87
- Fig. a 8 Downflow Velocity Test Arrangement in Accordance with en 12469 / DIN 1298089
  - Airflow Pattern Test91
    - A.10.1 Airflow Direction Test91
    - A.10.2 Leakproofness Test for the Front Window91
- Fig. a 9 Airflow Pattern I91
  - A.10.3 Leakproofness Test for Edges and Corners92
  - Leakproofness Test for Seals and for the Upper Closing Edge92
- Fig. a 10 Airflow Pattern II92
  - Noise Level Test93
- Fig. a 11 Noise Level Test93
  - Lighting Intensity Test94
- Fig. A12 Lighting Intensity Test94
  - Vibration Test95
- Fig. A13 Vibration Test95
  - UV Intensity Test96
  - A.15 Setting the Monitoring Devices96
    - Downflow Velocity Alarm Values96
    - Inflow Velocity Alarm Values97
Decontamination with Gas98
- Disinfection with Formaldehyde98
  - Procedure98
- Fig. B 1 Disinfection Hood100
Installation Instructions, KSP Version101
- Sequence of the Installation101
- Fig. C 1 Prefilter Housing and Height Adjustment101
- Fig. C 2 Lifting Mechanism and Retaining Screws102
  - Equipping the Prefilter Housing103
  - Starting the Auto-Calibration Routine103
- Fig. C 3 Equipping the Prefilter Housing103
  - Conducting the Installation Test104
  - Marking the Device for Its Intended Purpose104
Spare Parts105
Parameter Lists112
- Service Parameter Overview112
- Overview Error Code of Front Window Function113
- Function Parameter Overview114
- Disinfection Parameter Overview115
Failure Codes116
- Failure Code Overview116
Test Report117

Brand	Kendro
Model	HERAsafe KS 15
Category	Laboratory Equipment
Language	English

Kendro HERAsafe KS 15 Service Instructions

Table of Contents

Other manuals for Kendro HERAsafe KS 15

Kendro HERAsafe KS 15 Specifications

Related product manuals