Kenmore 125.10135610 - User Manual

Questions and Answers

G
Gregory MoralesAug 2, 2025
Why my Kenmore 125.10135610 won’t run?
- K
  Katelyn ArnoldAug 3, 2025
  If your Kenmore Vacuum Cleaner won't run, there are several potential causes. First, ensure it's firmly plugged into the wall outlet and the ON/OFF switch is pressed. If that's not the issue, check your circuit breaker or fuse and reset or replace it if necessary. Another possibility is that the thermal protector has tripped; if so, allow the vacuum cleaner to cool for 50 minutes. Finally, the wall outlet itself might be defective, test it with another appliance.
X
xjonesAug 9, 2025
What to do if the agitator does not turn on my Kenmore 125.10135610 Vacuum Cleaner?
- R
  Rose FullerAug 9, 2025
  If the agitator on your Kenmore Vacuum Cleaner isn't turning, check these potential causes: a worn or broken belt (replace the belt), incorrect belt routing (check the belt routing), or the CARPET/BARE FLOOR selector is in the BARE FLOOR position (move the selector to the CARPET position).
L
Lauren CastilloAug 18, 2025
How to improve dirt pick-up on my Kenmore Vacuum Cleaner?
- T
  Taylor SmithAug 18, 2025
  If your Kenmore Vacuum Cleaner isn't picking up dirt well, consider these possibilities: * Empty the dust cup if it's full or clogged. * Adjust the floor setting to the correct one. * Replace the agitator if it's worn. * Replace the belt if it's worn or broken. * Check for and remove any clogs in the nozzle, hose, or wand. * Replace the hose if there's a hole in it. * Ensure the hose is fully inserted. * Check for clogs in the hose if the motor protection system activated. * Clean the pre-filter, primary filter, or replace the HEPA Media Exhaust filter if they're dirty.
W
wgarciaAug 26, 2025
Why is the airflow restricted when using attachments on my Kenmore Vacuum Cleaner?
- B
  Brian DoughertyAug 27, 2025
  If you notice restricted airflow and a change in sound when using attachments with your Kenmore Vacuum Cleaner, it might be due to fuzz, lint, pet hair, or other debris clogging the attachments. Also, new carpet fuzz might be clogging the air path. Check for and remove any clogs and clean the hose.

Summary

Important Safety Instructions

Assembly Instructions

Operating Instructions

Motor Protection System

Thermal Protector

Automatic system that turns off the motor to prevent damage from overheating or clogs.

By-Pass Valve

Valve that provides cooling air to prevent motor overheating when airflow is restricted.

Emptying Dust Cup

To Remove Dust Cup

To Empty Dust Cup

To Reinstall Dust Cup

Pre-Filter Cleaning

Primary Filter Cleaning

HEPA Media Exhaust Filter

Belt Changing

Agitator Cleaning

Removing Clogs

Remove Clog from Hose

Steps to identify and clear blockages within the vacuum cleaner's hose for optimal airflow.

Remove Clog from Floor;Tool Selector

Procedure to remove obstructions from the floor/tools selector cover and area.

Remove Clog from Pet HandiMate

Steps for clearing any clogs or residue from the Pet HandiMate attachment.

Troubleshooting

Kenmore 125.10135610 Specifications

General

Model Number	125.10135610
Brand	Kenmore
Color	Red
Power Source	Corded Electric
Voltage	120V
Amps	12A
Filter Type	HEPA
Type	Canister
Included Tools	Crevice tool, dusting brush
Weight	22 pounds