To Next PageTo Next PageHow to fix a Kenmore 125.10701610 cord that won’t rewind?
If the cord on your Kenmore Vacuum Cleaner won’t rewind, it could be due to a dirty power cord or the cord being jammed. Try cleaning the power cord first. If that doesn’t work, pull the cord out and try rewinding it again.
Why is my Kenmore 125.10701610 not picking up dirt well?
There are several reasons why your Kenmore Vacuum Cleaner might not be picking up dirt effectively. It could be due to a full or clogged dust bin, clogged airflow passages, dirty filters, a hole in the hose, or the dust bin not being properly closed. To resolve this, try the following: * Empty the dust bin. * Clear any blockages in the airflow passages. * Clean or replace the filters. * Replace the hose if it has a hole. * Ensure the dust bin is closed and latched correctly.
What to do if my Kenmore Vacuum Cleaner won’t start?
If your Kenmore Vacuum Cleaner isn’t starting, there are a couple of things you can check. First, make sure it’s firmly plugged into the wall outlet and the ON/OFF switch is set to the 'on' position. Second, check your household service panel for a tripped circuit breaker or blown fuse and reset the breaker or replace the fuse if necessary.
Why does my Kenmore Vacuum Cleaner start and then shut off?
Your Kenmore Vacuum Cleaner might be shutting off because the thermal protector in the canister has tripped. Please refer to the 'Thermal Protector' section within the PERFORMANCE FEATURES for further instructions.
Lists part numbers for replacement filters such as exhaust, secondary, and dust bin filters.
Diagram identifying key components of the hose, wand, and vacuum cleaner attachments.
Diagram labeling parts of the vacuum cleaner canister, including controls and filters.
Steps for connecting the hose to the air inlet and assembling the telescoping wand.
Instructions for attaching the turbine unit and floor brush to the wand.
Guide on how to adjust the telescoping wand length using the slider button.
Instructions for storing the combination tool on the wand when not in use.
Steps for plugging in, turning on, and operating the vacuum cleaner's power switch.
Guidance on effective cleaning patterns, hose swivel use, and stair safety.
How to attach and use various cleaning tools like the crevice and dusting brushes.
Explanation of the hose stand, thermal protector, and suction control adjustments.
Procedure for clearing blockages in the hose and turbine unit to restore airflow.
Method for wiping down the vacuum cleaner's exterior and attachments with a damp cloth.
Detailed steps on how to safely remove and empty the dust bin from the vacuum cleaner.
Instructions for removing and cleaning the dust bin filter using the included brush.
Guide on washing the dust bin and filter, noting dishwasher use is prohibited.
Instructions for replacing the HEPA media exhaust filter, including part numbers.
Steps for removing, rinsing, and drying the secondary filter for maintenance.
Table of common vacuum cleaner problems, their possible causes, and solutions.
General| Brand | Kenmore |
|---|---|
| Model | 125.10701610 |
| Power Source | Corded Electric |
| Voltage | 120V |
| Filter Type | HEPA |
| Type | Canister |
| Amps | 12 Amps |
| Included Tools | Crevice Tool, Upholstery Tool |
| Dust Capacity | 2.5 quarts |
