Need help?Do you have a question about the Kenmore 1347 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | 1347 |
| Category | Sewing Machine |
| Language | English |
Details on reducing or increasing upper thread tension to achieve a balanced stitch.
Instructions on setting up the machine for blind hemming using a specific stitch setting.
Settings and instructions for performing straight stitching for garment construction.
Techniques for fastening seams securely at the beginning and end using reverse stitching.
How to turn a square corner accurately using the cornering guide and seam guides.
Using zigzag stitch to overcast raw edges of fabric to prevent fraying.
How to use zigzag stitch to reduce bulk when sewing interfacing darts.
Instructions for using the straight stretch stitch on knitted and other stretchable fabrics.
Using stretch stitches for decorative purposes like rick-rack or as a top stitch.
How to perform satin stitching for applique, monogramming, and buttonholes, including tension adjustments.
Guidance on installing regular and invisible zippers using adjustable presser feet.
Instructions on using the presser foot to create cording for slipcovers or other projects.
Step-by-step guide to finishing a hem using blind stitches for a clean look.
Techniques for repairing straight or three-cornered tears in fabric, with reinforcement advice.
Instructions for darning worn areas of fabric using a sewing machine, including hoop usage.
Steps for securely sewing buttons onto fabric using the sewing machine.
How to use bar tacking stitches to reinforce points of strain on garments.
Causes and corrections for irregular stitches and broken needles.
Solutions for thread bunching and fabric puckering during sewing operations.
Troubleshooting steps for skipped stitches and upper/bobbin thread breakage.
Diagnosing and fixing issues with fabric not moving or the machine jamming/knocking.
Procedure for cleaning lint and dust from feed dogs and the shuttle area.
Step-by-step guide on how to remove and replace the shuttle assembly.
To Next Page
