Changing Comor PaneR
If you are redecorating, you can change your dishwash-
er's fiont panel to match or blend with your new colors°
The panel is held in place by the door trim and the
trim on the panel below the door° Each side of each
panel is a different color, Or you can paint the panel
with the color of your own choice,
WARNING: To prevent electric shock, disconnect
electrical powel supply to dishwasher before changing
panels.
How to change the door panel:
1., Take out trim screws on either side of'dishwasher
door. Remove side trim.
2. Slide out the door panel. (Careful--edges may be
sharp,.)
/
/
2. Remove the top mounting screws.
3, Take out the top trim screws and remove the top
trim.
4, Slide the co!or panel(s) up and out and put the
color you want in front.
5. Replace the top trim and screws.
6o Replace the entire access assembly by reversing the
steps,
DO NOT operate dishwasher while changing panels
or' when bottom access panel is removed°
Wood Panel Trim Kits
Wood panel trim ldts contain trim and instructions
for adding a decorative wood door panel and bottom
access panel no thicker than 114" to match kitchen
cabinets.
Specify the trim color of your choice from the follow-
ing options:
GPF40BC (Chrome Trim and Screws)
GPF40BK (Black Trim)
GPF40WH (White Trim)
GPF40AD (Almond Trim)
.3. Turn the door panel around and put the color you
want in front.
a Rc_rdor_ rh,_ clr_r_r p_neq side trim a_d screws
How to change the bottom panel:
1. Remove the bottom pane! attachment screws.
TOP
MOUNTING
Ordering Dnformation
Order a Trim Kit widmut charge from:
Dri-View Manufacturing
-.,_I *,_tj I _J=IIIIUIIU d _._'t**,_
Louisville, KY 40209
BOTTOH PANEL ATTACHHENT SCREWS
1]
To Next Page
Loading...