To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 153.332421 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | 153.332421 |
| Category | Water Heater |
| Language | English |
Defines key roles and terms for proper installation and service, including technician and supplier responsibilities.
Outlines critical safety warnings and hazards before operation, covering fire, explosion, and hazard symbol meanings.
Details the warranty coverage for parts and labor for the water heater itself over three years.
Highlights key safety and installation considerations for the product, emphasizing reading the entire manual.
Identifies key components of the gas water heater with a labeled diagram for easy reference.
Provides a checklist to ensure proper water heater location, system checks, and ventilation requirements.
Step-by-step guide for safely disconnecting and removing the existing water heater before installation.
Guidelines for selecting an appropriate and safe indoor location for the water heater, avoiding hazards.
Instructions for connecting the gas supply, including safety checks, shut-off valves, and leak detection.
Requirements for providing adequate combustion air in enclosed or confined spaces for safe operation.
Instructions for correctly installing the draft hood to ensure proper venting of combustion gases.
Steps and considerations for installing water piping and fittings, including material compatibility.
Details on installing and using the temperature-pressure relief valve for safety against overpressure.
Step-by-step guide for safely lighting the pilot and main burner, including safety warnings.
Procedure for safely shutting down the water heater in an emergency situation.
Instructions for setting and adjusting the water temperature control to the desired level.
Procedures for inspecting the vent system for obstructions, damage, and proper function annually.
Instructions for inspecting the anode rod for corrosion protection and tank longevity.
Information on contacting service for repairs and troubleshooting, including the Sears Service Center number.
Procedure for annually inspecting and cleaning the base-ring filter for optimal performance.
Steps for removing the manifold and burner assembly for maintenance or replacement.
Procedure for testing the igniter system for proper spark generation and functionality.
Checklist for ensuring the Flammable Vapor Ignition Resistance system is functional after service.
Guidance on troubleshooting issues encountered during initial startup, focusing on thermal expansion.
Lists common causes and corrective actions for the burner failing to ignite.
Troubleshooting steps for when the status light is off or not blinking, indicating no pilot or low temp.
Flowchart for diagnosing why the pilot light won't ignite on a new installation.
