BuI-rONHOLE MAKING - USING BUTTONHOLE ATTACHMENT
0
1 -- I_
Zigzag needle plate
and feed cover plate
Buttonhole foot
I -°nII
,i!t I
Any setting
REGULAR WORKED BUTTONHOLE
(STRAIGHT, KEYHOLE AND EYE-
LET)
PROCEDURE
Stitch Selector - /VVVV_
Stitch Width - 1 - 1½
Zigzag Needle Plate
Feed Cover Plate
Buttonhole Foot
1. Raise needle to its highest position and
raise presser foot. Remove accessory box
and bobbin cover plate.
Insert buttonhole cover plate at 45 degree
angle and snap it down into place
pressing it against the needle plate.
.
Select correct template for type button-
hole you want. Insert template into slot of
guide plate. Turn template advance knob
until desired size appears in window on
the top side of guide plate.
\
Template advance knob
53
To Next Page
Loading...
