®
.
Slip guide plate onto machine so it fits in
place with pinion gear in the center of arc
hole of template. Be sure guide block is
inserted in guide slot.
Guide.
slot
I,H/J iLil .IJ Guide
.
Pick up bobbin thread through guide plate
by turning hand wheel. Place fabric
between presser foot and guideplate.
Align marked buttonhole with cut-out of
foot. Line up edge of fabric with markings
on guideplate. If you wish all buttonholes
to be 3/4" from edge of garment, for
example, line up fabric with 3/4" marking
each time you start a buttonhole.
Now you're ready to stitch the shape
you've selected-straight, keyhole or
eyelet. Your template will guide you.
54
To Next Page
Loading...
