Cool Warm
Cold Hot
WASH TEMP
9. Press START/Pause/Unlock Lid
to begin wash cycle
CANCEL
Hold 3 Sec.
START
PAUSE
Unlock Lid
Once you select a cycle, select the desire wash Temperature by
turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Hot
Some cold water is added to save
energy. Thiswill be cooler than
your hot water heater setting.
Whites and pastels
Durable garments
Heavy soils
W_rm
Some cold water will be added, so Bright colors
this will be cooler than what your Moderate to light soils
previous washer provided.
cool i
Warm water is added to assist in _i Colors that bleed
soil removal and to help dissolve _ or fade
detergents.
Cold
Press the START/PAUSE/Unlock Lid button to start the wash cycle.
When the cycle has flnished, the CYCLE COMPLETE indicator will
light. Promptly remove garments after cycle has completed to
avoid odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
PAUSE/Unlock Lid again to restart the cycle.
If lid Js left open for more than 10 minutes the water win pump
out automatically.
8. Select cycle options, if desired
One 2nd
Rinse Rinse Off On
RINSE STAINBOOST
If you would like to add a 2nd Rinse and/or use the
STAINBOOST option, turn the knob for that feature.
The STAINBOOST option provides enhanced cleaning action for
tough stains. It win add additional agitation and soak time to the
cycle.
10
To Next Page
Loading...
Need help?
General