RINSE
Cycle Lid
Sensing Wash Rinse Spin Complete Locked
• • 0 • • •
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. Always select °_On" for Fabric
softener to be added when using the Fabric Softener option.
Some options use spray rinsing.
SPIN
Cycle Lid
Sensing Wash Rinse Spin Complete Locked
• ® • O • •
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
LID LOCKED
Cycle Lid
Sensing Wash Rinse Spin Complete Locked
Q ® • O O O
To allow for proper load sensing and spinning, the lid will lock
and the Lid Locked light will turn on. This light indicates that
the lid is locked and cannot be opened.
If you need to open the lid, press START/PAUSE/
Unlock Lid. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed.
Press START/PAUSE/Unlock Lid again to resume
the cycle.
I N_. START
Unlock Lid
CYCLE COMPLETE
Cycle Lid
Sensing Wash Rinse Spin Complete Locked
® • ® ® 0 ®
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
6
To Next Page
Loading...
Need help?
General