SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
CYCLECOMPLETE
Once the cycle iscomplete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for proper load sensing and spinning, the lid will loci<
and the Lid Locked light will turn on. This light indicates that
the lid is locked and cannot be opened.
If you need to open the lid, press START/PAUSE/
Unlock Lid. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed.
Press START/PAUSE/Unlock Lid again to resume
the cycle.
6
To Next Page
Loading...
Need help?
General
