"SECTION! 2:.'- _P__U R:MACPI _ E__
Set Up the Machine (Continued)
Set the Pressure Dial
Pressore
Control
dial
Setting
mark
The pressure control dial is located inside the face cover plate.
Set the dial aligning the setting mark on the dial with the groove as follows,
3 ..... most sewing
2 ..... applique and Cut-Out work
1 ..... basting, sewing chiffon, lace, organdy and other lightweight fabrics.
Also for velours and knits (with more stretch).
NOTE: The pressure dial should be reset at 3 after changing pressure, so
the machine is ready for most normal sewing the next time you use
it.
To Next Page
Loading...
