Why is my Kenmore 405.84106 Air Conditioner not cool enough?
If your Kenmore Air Conditioner isn't cooling sufficiently, ensure all windows and doors are closed, and remove any heat sources from the room. Check that the exhaust air hose is correctly connected and not blocked. Also, try decreasing the set temperature and cleaning the air filter.
What to do if the reset button pops out on my Kenmore Air Conditioner LCDI plug?
If the RESET button pops out on the LCDI plug of your Kenmore Air Conditioner, it indicates a temporary fault condition. Simply press the reset button on the LCDI plug to resolve this.
Why does my Kenmore 405.84106 Air Conditioner keep stopping?
If your Kenmore Air Conditioner stops operating, it could be due to the automatic overheat protection function. This occurs when the temperature at the air outlet exceeds 158ºF/70ºC. To resolve this, switch the unit on again after it has cooled down.
General| Brand | Kenmore |
|---|---|
| Model | 405.84106 |
| Category | Air Conditioner |
| Language | English |
Essential safety guidelines for operating the air conditioner, covering electrical safety, placement, and usage.
Details electrical requirements and safety precautions for proper air conditioner operation and use.
Highlights critical warnings regarding shock, fire, and hot surfaces for safe appliance operation.
Specifies the recommended room temperature ranges for COOL and DRY operating modes.
Lists the necessary tools for installing the window kit for the air conditioner.
Explains the importance of proper grounding, the 3-prong plug, and outlet requirements for safety.
Provides guidelines on using extension cords, specifying gauge and wattage requirements.
Details technical specifications for different models, including voltage, capacity, and dimensions.
Identifies and describes the main components visible on the front of the air conditioner unit.
Identifies and describes the main components visible on the rear of the air conditioner unit.
Provides instructions on where to place the unit for optimal performance, stability, and safety.
Explains how to install the window slider, including fitting and securing it for different window types.
Details how to secure the window slider using a screw and how to modify it for smaller openings.
Step-by-step guide for installing the window slider kit in a double-hung sash window.
Step-by-step guide for installing the window slider kit in a sliding sash window.
Instructions on how to connect and position the exhaust hose and adapters for proper ventilation.
Details how to set up drainage for dehumidifying mode and how the unit indicates a full water tray.
Explains the function of each button on the control panel for operating the air conditioner.
Describes how to use the remote control's TEMP SENSOR feature for precise temperature management.
Lists included accessories, quantities, and common error codes with troubleshooting steps.
Step-by-step guide for operating the unit in COOL mode, including temperature and fan speed settings.
Details how to operate the unit in AUTO, FAN, and TIMER modes, including setting times.
Explains the SLEEP function which gradually adjusts the temperature for comfort during sleep.
Describes the auto-restart function after power failure and the compressor's 3-minute delay.
Explains how to adjust the air flow direction using the louver and important precautions.
Details the optimal range and conditions for using the remote control effectively.
Provides a step-by-step guide on how to replace the batteries in the remote control.
Lists the technical specifications for the remote control, including model and signal range.
Explains the functions of the primary buttons on the remote control for basic operation.
Describes how the ONE TOUCH button restores favorite settings or defaults to AUTO mode.
Explains advanced functions like fan speed selection, timer programming, and lock mode.
Explains indicators related to signal transmission and the current operating mode of the unit.
Details displays for set temperature, timer settings, and fan speed levels.
Explains indicators for power status, locked mode, temperature sensor, and sleep mode.
Steps for operating the unit in AUTO mode, including temperature settings and mode selection.
Instructions for operating in COOL and FAN modes, including temperature and fan speed adjustments.
Steps for operating the unit in DRY (Dehumidifying) mode, including starting the unit.
Explains LED button function and how to set Auto-on and Auto-off timer sequences.
Provides examples of setting the Auto-ON and Auto-OFF timers for various scenarios.
Details how to set combined timers for simultaneous ON and OFF operations.
Explains how the SLEEP function gradually increases temperature for comfort during sleep.
Important safety precautions to follow before cleaning or servicing the air conditioner.
Instructions on how to remove, clean, and reinstall the air filters for optimal performance.
Guidance on cleaning the exterior surfaces of the air conditioner unit.
Steps to prepare the unit for long-term storage, including draining and drying.
Lists common issues, their causes, and solutions for troubleshooting the air conditioner.
Details the advantages of purchasing a Master Protection Agreement for extended coverage and service.
Provides contact numbers for purchasing protection agreements and installation services.
Information on accessing product manuals, troubleshooting, and expert advice online.
Details on scheduling in-home repair for appliances and home systems.
Information on locating and contacting nearest service centers for carry-in items.
Contact details for purchasing protection agreements for serviced products.
To Next Page
