Why is my Kenmore Air Conditioner not cool enough?
If your Kenmore Air Conditioner isn't cooling sufficiently, ensure all windows and doors are closed, and remove any heat sources from the room. Check that the exhaust air hose is correctly connected and not blocked. Also, try decreasing the set temperature and cleaning the air filter.
What to do if the reset button pops out on my Kenmore Air Conditioner LCDI plug?
If the RESET button pops out on the LCDI plug of your Kenmore Air Conditioner, it indicates a temporary fault condition. Simply press the reset button on the LCDI plug to resolve this.
Why does my Kenmore Air Conditioner keep stopping?
If your Kenmore Air Conditioner stops operating, it could be due to the automatic overheat protection function. This occurs when the temperature at the air outlet exceeds 158ºF/70ºC. To resolve this, switch the unit on again after it has cooled down.
How to reduce noise and vibration from my Kenmore 405.84126 Air Conditioner?
If your Kenmore Air Conditioner is making excessive noise or vibrating, it might be because the ground is not level or flat enough. If possible, place the unit on a flat, level ground.
General| Brand | Kenmore |
|---|---|
| Model Number | 405.84126 |
| Cooling Capacity | 8, 000 BTU |
| Room Size Coverage | Up to 350 sq. ft. |
| Fan Speeds | 3 |
| Power Supply | 115V / 60Hz |
| Operating Modes | Fan |
| Included Accessories | Remote Control, Window Mounting Kit |
Guidance for initial operation and safe use of the portable air conditioner.
Details the terms, conditions, and limitations of the manufacturer's 1-year warranty.
Essential safety precautions and warnings for operating the appliance.
Critical electrical requirements, grounding, and hazard warnings for safe operation.
Technical data including model, voltage, cooling capacity, and dimensions.
Labels and descriptions of the unit's front and rear components.
Guidance on unit placement, window slider installation, and exhaust hose setup.
Instructions for proper exhaust hose connection and managing water drainage.
Explanation of the control panel buttons and remote control functions.
Understanding the various indicators shown on the unit's LCD screen.
How to use AUTO, COOLING, FAN, and DEHUMIDIFYING modes.
Setting auto-on/off timers and utilizing the sleep mode for comfort.
Procedures for cleaning filters, exterior, and long-term storage.
Identifying and resolving common problems, their causes, and solutions.
Information on purchasing and benefits of the extended protection agreement.
To Next Page