HANDLE INSTALLATION
1. Make sure the word “UP” on the rear of the hanle is fac-
ing right side up.
2. Match the upper and lower handle Locking Tabs on the
doors to the handles.
3. Fix the handles to the doors by sliding them down firmly
until you hear a click sound.
4. Check the installation of the handles by pulling on them.
If the handles have been inserted correctly, they should
not move. Ensure the two handles are horizontally
aligned.
NOTE : If the REF handles are not aligned, repeat num-
ber 2. To align the doors, refer to the next page.
REFRIGERATOR INSTALLATION
To Next Page
Loading...
