GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of the Kenmore
refrigerator. We hope you enjoy the state-of-art features and
efficiencies that this new refrigerator offers.
Selecting the best location for the refrigerator.
doors to open easily.
cooling system. If the refrigerator does not have enough
space, the internal cooling system may not work
properly.
First thing! Make sure that you can easily move your
refrigerator to its final location by measuring doorways (both
width and height), thresholds, ceilings,
stairways, etc.
The following chart details the exact height and depth
of your new Kenmore refrigerator.
CLEARANCES
installing. This will help reduce power consumption
and keep your energy bills lower.
will go below 10ºC (50°F).
FLOORING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator
or approximately 223 lbs (106 kg). To protect the finish
of the flooring, cut a large section of the cardboard carton
and place under the refrigerator where you are working.
When moving, be sure to pull the unit straight out and push
back in straight.
REFRIGERATOR INSTALLATION
9
Control Lever
Screw driver (–)
CAUTION
To prevent damage to the floor while moving the
refrigerator, always make sure the front leveling legs
are in the up position (above the floor). Refer to
“Leveling the Refrigerator” on page 16.
Model
65702
65703
65709
65712
65713
65719
Capacity (cu.ft.) 18 20
Width (in.[mm]) 32 1/4 (817) 32 1/4 (817)
Depth
(in.[mm])
without door 24 3/8 (617) 26 1/4 (667)
with door 30 1/2 (774) 32 1/2 (824)
Height
(in.[mm])
without Hinge 68 5/8 (1743) 68 5/8 (1743)
with Hinge 69 3/4 (1772) 69 3/4 (1772)
To Next Page
Loading...
