Kenmore 795.7132 Series

Questions and Answers

M
Martin CarterAug 21, 2025
Why is my Kenmore 795.7132 section too warm?
- A
  alyssa74Aug 21, 2025
  If your Kenmore Refrigerator or Freezer section is too warm, several factors could be contributing. If recently installed, allow up to 24 hours to reach the desired temperature. Ensure air vents aren't blocked by rearranging items for proper airflow. Reduce the frequency and duration of door openings. Avoid installing the unit in hot locations, ensuring temperatures stay below 110°F. Allow hot food to cool before refrigerating. If the temperature control isn't set correctly, adjust it gradually and wait for stabilization. If the defrost cycle recently completed, allow 30 minutes for temperature restoration.
L
Leah BellAug 25, 2025
Why is there moisture inside my Kenmore Refrigerator?
- W
  Wanda RussellAug 25, 2025
  If you notice interior moisture buildup in your Kenmore Refrigerator, it may be due to frequent or prolonged door openings. Try to lessen how often and how long you open the doors. Also, check that the doors close correctly. Humid weather can contribute, so maintain reasonable humidity in your home. If the defrost cycle recently completed, wait 30 minutes for the temperature to stabilize. Ensure food is correctly packaged; wipe containers dry and use sealed packaging to prevent condensation and frost.
D
David MoodyAug 27, 2025
What to do if food is freezing in my Kenmore Refrigerator?
- E
  Erin ArmstrongAug 27, 2025
  If food is freezing in your Kenmore Refrigerator compartment, it might be because food with high water content is near an air vent; rearrange these items. Also, the refrigerator temperature control may be set incorrectly; adjust it one increment at a time and wait for the temperature to stabilize. Finally, the refrigerator should not be operated in temperatures below 55°F (13°C).
C
christina32Aug 30, 2025
Why is my Kenmore Refrigerator too cold?
- K
  Kevin ScottAug 30, 2025
  If your Kenmore Refrigerator or Freezer section is too cold, it may be due to incorrect temperature control settings. Adjust the control one increment at a time, allowing the temperature to stabilize.
Z
zjonesSep 2, 2025
Why is my Kenmore Refrigerator ice maker not making enough ice?
- A
  Amanda WrightSep 3, 2025
  If your Kenmore Refrigerator icemaker isn't making enough ice, it could be because the demand exceeds the ice storage capacity; the icemaker produces about 100 cubes in 24 hours. Ensure the house water supply is connected, the valve is fully open, and not clogged. Low water pressure (below 20 psi) can also be a factor, needing to be between 20 and 120 psi. Check for kinks in the tubing connecting the refrigerator to the house supply valve and straighten or repair as needed.
C
Cameron WatsonSep 5, 2025
Why does my Kenmore Refrigerator ice taste bad?
- T
  Tony CastilloSep 5, 2025
  If your Kenmore Refrigerator ice has a bad taste or odor, it could be due to several reasons. If your water supply contains minerals like sulfur, consider installing a water filter. If the icemaker was recently installed, discard the first few batches of ice. If the ice has been stored for too long, throw it away and make a new supply. Ensure food in both compartments is properly stored and rewrap if necessary. The refrigerator's interior or the ice storage bin may need cleaning. Empty and wash the bin, ensuring it's completely dry before reinstalling.
K
Katie BarreraSep 8, 2025
Why is my Kenmore 795.7132 dispensing warm water?
- M
  Mary SmithSep 8, 2025
  If your Kenmore Refrigerator is dispensing warm water, it could be because the refrigerator was recently installed. Allow 24 hours after installation for the water storage tank to cool completely. If the water dispenser has been used recently and the storage tank was exhausted, dispense water until the storage tank refills.
D
davidsonjamesSep 12, 2025
Why is my Kenmore Refrigerator icemaker making too much ice?
- B
  Barbara SimpsonSep 12, 2025
  If your Kenmore Refrigerator icemaker is making too much ice, it could be due to an obstructed icemaker sensor. Empty the ice bin. If your icemaker has an ice maker arm, ensure it moves freely.
C
Christopher FreemanNov 14, 2025
Why is my Kenmore 795.7132 Refrigerator and Freezer not cooling?
- W
  Wanda CookNov 15, 2025
  If your Kenmore Refrigerator and Freezer sections aren't cooling, several factors could be at play. First, ensure the refrigerator control isn't set to OFF. If it is, turn it ON, consulting the Setting the Controls section for correct temperature settings. Also, check if the refrigerator is in Demo Mode and disable it as described in the Setting the Controls section. If the unit was recently installed or relocated, allow up to 24 hours for temperature stabilization, ensuring it stands upright for 24 hours after relocation before powering on. Frequent door openings or adding large/hot food amounts can also affect cooling; minimize these actions. Confirm the doors are closing completely and that the refrigerator isn't in a hot location (above 110°F). It might also be in the defrost cycle; wa...
X
xloweNov 17, 2025
Why is my Kenmore Refrigerator not dispensing water?
- C
  Caroline SingletonNov 17, 2025
  If your Kenmore Refrigerator is not dispensing water, there could be several reasons. If it's a new installation or the water line was recently connected, depress and release the dispenser pad for 30-second ON and 60-second OFF cycles. Check if the dispenser panel is locked; if so, press and hold the Control Lock button for three seconds to unlock it. Ensure the dispenser is set for water dispensing by pressing the Ice/Water Select button. Make sure the refrigerator or freezer doors are fully closed, as water won't dispense if they're open. If the water filter was recently removed or replaced, repeat the 30-second ON and 60-second OFF cycles. Inspect the tubing connecting the refrigerator to the house supply valve for kinks and straighten or repair as needed. Finally, ensure the house wate...