Kenmore 795.72033 - Page 34

- 34 -
<CON2>
9-3 Water mode doesn’t work
No
1
2
Checking flow
Check the loose connection on the
Dispenser PCB
Check the Purple to White on the Dispenser
PCB (While pushing the Pad S/W)
Result & SVC Action
(3) (4)
4 Check the resistance value.
<Pilot Valve>
Machine Room
<Water Valve>
In door
(1) to (2)
(3) to (4)
360 ~ 420
Ω
Other
360 ~ 420
Ω
Other
Explain
Replace
Pilot Valve
Explain
Replace
Water Valve
Point Result SVC Action
(1) (2)
Dispenser Ice Maker
Pushing
Not
pushing
112 ~ 115 V
Other
0 ~2 V
Other
Go to the 3
Change
Dispenser PCB
Go to the 3
Change
Dispenser PCB
Ice Button Result SVC Action
Pushing
Not
pushing
9 ~ 12 V
Other
0 ~2 V
Other
Go to the 4
Change
Dispenser PCB
Go to the 4
Change
Dispenser PCB
Ice Button Result SVC Action
Appliantology.org