What to do if my Kenmore 796.8099 Dryer will not turn on?
If your Kenmore dryer won't turn on, first ensure the power cord is securely plugged into a grounded outlet matching the dryer’s rating plate. Also, check your house fuse or circuit breaker. Reset the circuit breaker or replace the fuse if necessary. If the problem is a circuit overload, have it corrected by a qualified electrician.
Why does my Kenmore 796.8099 Dryer not heat up?
If your Kenmore dryer isn't heating, check your house fuse or circuit breaker and reset it or replace the fuse if needed. For gas models, confirm that both the house gas shutoff and the dryer gas shutoff are fully open.
Why does my Kenmore Dryer take so long to dry clothes?
Several factors can cause your Kenmore dryer to take too long. Ensure you're separating heavy items from lightweight ones, as heavy fabrics retain more moisture and require longer drying times. Use the correct control settings for your load type. Clean the lint filter before each load. Check for blocked or overly long exhaust ducts. Avoid overloading or underloading the dryer. If a fuse is blown or a circuit breaker tripped, reset it or replace the fuse.
How to fix lint on clothes after drying in my Kenmore 796.8099 Dryer?
To reduce lint on clothes after drying with your Kenmore dryer, ensure the lint filter is cleaned before every load. Sort laundry properly, separating lint producers from lint trappers. Check pockets for tissues or paper before washing. Avoid overloading the dryer by dividing larger loads into smaller ones. Excess static can also attract lint, refer to the section about static in clothes.
Why is there excess static in clothes after drying in my Kenmore 796.8099?
Excess static in clothes after drying in your Kenmore dryer can be due to several reasons. Try using a fabric softener, following the manufacturer’s instructions. Adjust your dryer settings and use a shorter drying time, or use SENSOR DRY cycles, as overdrying can cause static. Drying synthetic fabrics or blends can also increase static; using a fabric softener may help.
Why does my Kenmore 796.8099 display error code tE1 or tE2?
If your Kenmore dryer displays error code tE1 or tE2, it indicates that the thermistor is malfunctioning. Turn off the dryer and call for service.
Why does my Kenmore 796.8099 Dryer have greasy or dirty spots on clothes?
Greasy or dirty spots on clothes after drying in your Kenmore dryer can occur if fabric softener is used incorrectly, so follow the instructions provided with your fabric softener. Ensure you only dry clean items, as dirty items can soil clean clothes. Stains on dried clothes may also be stains that weren’t removed during washing, so ensure clothes are completely cleaned according to the instructions for your washer and detergent.
Why is the drying time not consistent on my Kenmore 796.8099?
Inconsistent drying times with your Kenmore dryer can occur if heat settings, load size, or dampness of clothing varies. The drying time depends on the heat setting, type of heat used (electric, natural, or LP gas), load size, fabric types, wetness of clothes, and the condition of the exhaust ducts and lint filter.
Why are clothes wrinkled after drying in my Kenmore Dryer?
Clothes can wrinkle after drying in your Kenmore dryer if they are dried for too long. Try a shorter drying time and remove items while they still retain a slight amount of moisture. Also, remove items from the dryer immediately at the end of the cycle to prevent wrinkles.
Why are clothes shrinking in my Kenmore Dryer?
To avoid shrinkage when using your Kenmore dryer, carefully follow the fabric care instructions for your garment.
Comprehensive safety guidelines covering fire, explosion, shock, and basic usage risks.
Focuses on safe electrical connections, grounding, and wiring requirements.
Guidelines for safe installation, clearances, and exhaust system setup.
Specific warnings and risks associated with steam dryer cycles.
Highlights unique functionalities and benefits of the dryer.
Identifies and describes the major physical parts of the dryer.
Specifies physical requirements for dryer placement and surrounding space.
Details the process for connecting the dryer to gas and electrical utilities.
Guides the installation of the exhaust system for proper airflow.
Instructions for ensuring dryer stability and adjusting door accessibility.
Explains the dryer's interface, buttons, and basic operating procedures.
Details available drying cycles, fabric types, and selectable options.
Provides instructions and notes for using the dryer's steam features.
Instructions for maintaining the dryer's exterior, interior, and lint filter.
Offers solutions for common dryer malfunctions and error codes.
Guide for securely mounting the dryer on top of a washer.
Instructions for configuring networking features with the Remote Laundry Monitor.
Installation guides for pedestals and side/bottom venting kits.
Explains the terms, coverage, and limitations of the product warranty.
General| Brand | Kenmore |
|---|---|
| Model Number | 796.8099 |
| Fuel Type | Electric |
| Color | White |
| Dryer Venting | Vented |
| Wrinkle Guard Option | Yes |
| End of Cycle Signal | Yes |
| Power Source | Electric |
| Voltage | 240V |
| Type | Dryer |
| Amperage | 30A |
To Next Page