9
Features may vary according to model
Features At A Glance
Cup Shelves
(on some models)
Nozzle or Spray Arm
Top Rack
Serial Label
(located on right side
of tub)
Bottom Rack
Silverware
Basket
Glass Trap
Heating
Element
Rinse Aid
Dispenser
Detergent
Dispenser
Overfi ll
Protector
Lower Spray
Arm
Adjustable
Upper Rack
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray
arms against soiled surfaces. First, the dishwasher fi lls with water covering the fi lter area.
Water is then pumped through the spray arms. Soil Particles go through and across the fi lters,
and down the drain as the water is pumped out. This series of steps are repeated as needed.
The number of water fi lls will vary with the cycle being used. Features may vary by series.
Bowl Tines
Self-Cleaning
Filter
Tub Gasket
Operating Instructions
Blower Vent Assembly
Middle Spray
Arm
Getting Started
1. Load Dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Select desired CYCLE (See Cycle Chart).
The indicator light will glow when selected.
5. Select desired OPTION (See Energy Options).
The indicator light will glow when selected.
6. Run hot water faucet nearest dishwasher until water is at or near 120
0
F for optimal
performance (See Water Temperature). Turn water off .
7. To start, press START/CANCEL pad.
8. Close door to latch.
To Next Page
Loading...