Need help?Do you have a question about the Kenmore 970L48022A0 and is the answer not in the manual?
Explains how safety items are labeled with WARNING or CAUTION.
Defines safety alert symbols (DANGER, WARNING, CAUTION, IMPORTANT) and their meanings.
Lists items to check for successful installation, covering hardware, leveling, water, and power.
Check if shipping hardware like foam support, bolts, and spacers are removed.
Ensure the washer is level and stable on all corners.
Verify water connections, hose installation, and pressure.
Confirm drain hose placement, height, and securing method.
Check if house power is on and the washer is plugged in.
Review instructions and verify door lock and water entry.
Electrical service must conform to local codes and NEC/CEC standards.
Warns about suffocation risk from packaging materials and how to handle them.
Advises having multiple people to move or lift the washer to prevent injury.
Warns against storing or using flammable liquids near the appliance.
Emphasizes applying safe practices and caution during installation and operation.
Prohibits stacking dryers on washers or washers on dryers.
Lists tools and materials needed for installation.
Details circuit, power supply, and outlet requirements for safe electrical connection.
Advises against using power from generators due to inconsistent voltage.
Specifies a properly grounded 3-prong receptacle for the power cord.
States GFI receptacle is not required for this washer.
Explains the necessity of grounding to prevent electrical shock.
Warns about electrical shock risk from improper grounding.
Explains grounding reduces shock risk by providing a path for electrical current.
Details faucet location, size, threading, and water pressure specifications.
Specifies drain capacity, standpipe diameter, and height requirements.
Defines the required minimum and maximum height for the drain standpipe.
Provides information on extending the drain hose for higher standpipes.
Specifies ventilation requirements for installing the washer in a closet or recess.
Provides step-by-step instructions for removing foam packaging safely.
Warns about suffocation risk from packaging materials.
Advises caution due to the washer's weight during handling.
Advises saving the styrofoam base and plug for future moves.
Instructs to remove bolts, clamps, and spacers used for shipping.
Notes that spacer material may need time to relax before removal.
Advises saving shipping hardware for future transportation to prevent damage.
Guides on locating and inserting hole plugs into the washer's back panel.
Explains how to properly level the washer for stability and reduced noise.
Refers to separate instructions for leveling on pedestals.
Provides steps for flushing lines, installing washers, and connecting water hoses.
Emphasizes the necessity of rubber washers for leak-free water connections.
Advises using only new hoses for connecting the water supply to the washer.
Details how to connect the drain hose and plug in the power cord.
Stresses turning off power at the breaker before plugging in the cord.
Informs about the location of the wiring diagram and technical data sheet.
Lists available pedestals and explains their function to elevate the washer.
Describes the kit for stacking a dryer on top of the washer.
Provides information on ordering an extension kit for the drain hose.
Specifies the need for this kit when installing in a mobile home.
Mentions the availability of a wrench for appliance adjustments.
Lists available touch-up paint pen colors for the washer.
Guides on how to obtain replacement parts for the washer.
To Next Page
General