Kenmore CROSSOVER MAX User Manual

1. Place the vacuum cleaner in the upright
locked position.
2. Remove the handle
from the wand by
pressing the HANDLE
RELEASE button.
3. Slide attachment
collar over open end

attachments as
needed. See
ATTACHMENT USE
TABLE (page 11).
CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
- 10 -
FLOOR BRUSH MODE USING ATTACHMENTS ON HANDLE
ABOVE FLOOR MODE
3. Slide attachment collar over open end
of wand.
eeded. See
ATTACHMENT USE TABLE (page 11).
1. Press WAND
RELEASE button.
2. Pull up to
release wand for
abov
cleaning.
1. Press WAND RELEASE button.
2. Pull back to release w
brush.
3. Lift wrom vacuum
cleaner.

Kenmore CROSSOVER MAX Specifications

General

Brand	Kenmore
Model	CROSSOVER MAX
Category	Vacuum Cleaner
Language	English