1.
Release the
handle by
placing foot
on the nozzle
and pull back
to change
handle
position.
When using the vacuum cleaner on bare
s, press the BARE FLOOR selector to
r.
Pressing the BARE FLOOR selector again will
turn the agitator on.
UPRIGHT MODE CROSSOVER MODE
2.
Press and hold body release.
3.
of nozzle.
OPERATION MODES
2.
Press the ON/OFF button to turn the
vacuum cleaner on or o.
NOTE: The agitator does not rotate when
the vacuum cleaner is in the upright
position.
- -
1.
Place vacuum cleaner
in the upright position.