- 22 -
Vacuum cleaner 1. Unplugged at wall outlet. 1. y, pess the
won’t run. ON/OFF switch.
2. Ted cicuit beake 2. Reset cicuit beak
own fuse. eplace fuse.
3. oteed. 3. Allow ve
4. Defective wall outlet. 4. Check with a good appliance
p. Have outlet p
seviced.
Poor job of dirt
pick-up.
ed dust cup.
W.
W.
Woken Belt.
Clogged nozzle, hosewand
Hole in hose.
Hose not inseted fully.
ote
activated.
Di.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Agitator does not 1. position. 1. Move handle f
turn. position.
2. Aovotecto 2. Pess AGITATOR RESET
ed
3. oteed. 3. Allow ve
4. Nozzle switch in BARE FLOOR 4. Pess nozzle switch to change
position.
ow restricted 1. A 1. Chef
with attachment use;ow. lint
sound changes.
2. Need 2. Check fove any
clogs and clean hose.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Revieyffny sevice
needeed in this Use & Cae Guidefed by
ed sevice agent.
TROUBLESHOOTING
WARNING
Disconnect electrical supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury.
pp
Ap
Replace agitato.
Replace beltp
Check fove any
clogs in nozzle, hose, and wand.
Replace hose.
Inset hose fullyp
,a
Check f