The Position of Telescoping Thread Guide Bar
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Attaching the Spool Cap and Net
f
f
/
Thread guide
Telescoping thread
"guide bar
_Stoppers
G® .
(_ Pull the telescoping thread guide bar up as
far as it will go.
Turn the thread guide bar until it clicks into
position,
Thread guides should stop directly above the
spool pins,
Spool cap
Spool holder /
/
_ _ /.Slit
==_.
t _ Spool pin
t t
Spool pin
D
.... J
(_ When you use a small thread spool, remove the spool holder from the spool pin. Then place the spool
with its slit side up, and put spool cap on top.
(_) If the thread slips aown from the spool during threading and/or sewing, put a net on the spoo as
illustrated for preventing jamming. The nets are supplied with the machine.
To Next Page
Loading...
Need help?
General
