SECTION 2_ PREPARE UR MACHINE JFOR,SEW NG> _ _ :,
e Threading the Upper Looper
, ,
1_ Draw the thread through
the thread guide second
from the right from back to
front.
= guide
plate
_) Pass the thread through the
holes ir the second row
from the right of threa_
guide plate as illustrated.
Looper
_hread
guide
g
(_) Pass the thread througn the
left side of thread guide
sliding the thread from right
_o left.
Place the spool of thread on the spool pin second
from the right.
[ * Points to thread for upper looper are
I marked in red.
E
12
f
How to Thread Only the Upper Looper
F
Lower looper
thread Upper looper
Turn the hand wheel toward you until the
upper looper comes to the middle point of its
travel, and unhook the thread of the lower
looper from the upper looper.
Thread the upper looper.
To Next Page
Loading...
Need help?
General
