10
Cookware Material types
ALUMINUM
COPPER
STAINLESS STEEL
CAST IRON
PORCELAIN-ENAMEL on METAL
GLASS
Before Setting Oven Controls
Removing and Replacing Oven Racks
To remove
To replace
Oven Vent Location
at right side of the front panel and
Arranging Oven Racks
OVEN VENT
This range has a fan that will turn “ON” and “OFF” by itself to keep the electronics cool. It may
continue to run after the range has been turned “OFF”, but may also stop immediately and then turn “ON”
after a while.
Surface Cooking
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
2 or 3
1 or 2
1