5
Features:
· Pedestrian mode.
· Quick selection for the gate open/close direction
· Reliable rolling code technology for remote control
· Emergency release key in case of power failure
· Stop in case of obstruction during gate opening
· Reverse in case of obstruction during gate closing
· Built in adjustable auto-close (none, 30, 60, 90
seconds)
· Built in max. Motor Running Time (MRT) for
multiple safety protection (90 seconds)
· Reliable electromagnetism limit for easy adjustment
· Can be equipped with a wide range of accessories
· Easy to install, and minimum maintenance required
Installation Overview
Installing the Opener
Caution:
* Be sure that the opener is installed in
a level and parallel position and is
properly secured. Improper installation
could result in property damage, severe
injury, and/or death.
* Before starting installation, ensure
that there is no point of friction during
the entire movement of the gate and
there is no danger of derailment.
* Ensure that the safety side panels are
present.
Necessary Tools: The following tools
may be necessary to install the gate
opener. Screwdrivers, power drill, wire
cutters and a wire stripper, a socket set, tape measure and level.
To Next Page
Loading...
Need help?
General
