2. Microwave Cooking
Press " Microwave " the LED will display "P100.Press " Microwave " for
times or turn " " to choose the power you want, and "P100", "P80" "P50",
" P30 " or " P10 " will display for each added press.
Then press " Start/+30Sec./Confirm " to confirm, and turn " “ to set
cooking time from 0:05to 95:00. Press " Start/+30Sec./Confirm " again to
start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you
can operate the oven as the following steps.
1) Press " " once, the screen display "P100".
2) Press " “ once again or turn " " to choose
3) Press " Start/+30Sec./Confirm " to confirm
4) Turn " " to adjust the cooking
5) Press " Start/+30Sec./Confirm " to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave display.
Microwave 80% microwave
power.
and the screen displays "P 80".
time until the oven displays "20:00".
8
OPERATING INSTRUCTIONS
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00",
buzzer will ring once.
1) Press "Clock/ Pre-Set ", the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within
0--23.
3) Press " Clock/ Pre-Set ", the minute figures will flash.
4) Turn " “ to adjust the minute figures, the input time should be within
0--59.
5) Press " Clock/ Pre-Set " to finish clock setting. ":" will flash, and the
time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear "
the oven will go back to the previous status automatically.
To Next Page
Loading...