Kenstar KJ20SSL2 - Operating Instructions: Advanced Cooking Programs; Setting Delayed Cooking Programs; Potato Auto Cooking Program; Auto Menu Operation Guide

10
7. Program set in Advance
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stage can be set at most.
Defrost should not be set as the cooking program.
Example: If you want to cook with 80% microwave power for 7 minutes, operate
it as the following:
a. Press once, the screen display "P100".
b. Press once again or turn " " to choose 80%
microwave power.
c. Press “START/+30SEC./CONFIRM” to confirm, and the screen displays
"P 80".
d. Turn " " to adjust the cooking time till the oven displays"7:00".
After the aboved steps, be careful not to press
“START/+30SEC./CONFIRM” to start cooking.
3) Press “CLOCK/PRE-SET”, the hour figures will flash.
4) Turn “ ” to adjust the hour figures, the input time
should be within 0--23.
5) Press “CLOCK/PRE-SET” the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within
0--59.
7) Press “START/+30SEC./CONFIRM” to finish setting. If the door is
closed, buzzer will ring twice when the time arrives, then cooking will start
automatically.
“MICROWAVE”
“MICROWAVE”
8. POTATO
1) Press “POTATO" once, and the LED will display "200".
2) Press “POTATO" several times or turn " " to choose the weight of
food, and "400" or "600" g will be selected.
3) Press “START/+30SEC./CONFIRM” to start cooking.
OPERATING INSTRUCTIONS
9. Auto Menu
1) Turn " " right to choose the menu, and "A1" to "L6” will display.
2) Press " Start/+30Sec./Confirm " to confirm.
3) Turn " " to choose the default weight as the menu chart.
4) Press " Start/+30Sec./Confirm " to start cooking.