Kenwood 104CD - Special Features; Before Applying Power; Safety Precautions

Special features
Adoption of mechanism that enables disc
changing even during Playback
Featuring the convenient function to record
CD tracks onto a tape
4 other discs can be changed not only when the unit is stopped, but also during
playback ¥
=at
NORMAL EDIT:
The edit function changes the order of CD tracks according to the tape tength so that
no tune is interrupted
MULT! EDIT:
Several CDs can be edited and recorded on 1 tape.
> Before applying power
~ 4k
~
Caution : Read this section carefully to ensure safe operation.
Units are designed for operation as follows.
U.S.A. and Canada AC 120 V only
Australia AC 240 V only
| Europe and U.K. AC 230 V only
! China and Russia . AC 220 V only
*Other countries... .- AC 110-120 / 220-240 V switchable
For the United Kingdom
Factory fitted moulded mains plug
1. The mains plug contains a fuse. For replacement, use only a 13-
Amp ASTA-approved (BS1362) fuse
2. The fuse cover must be refitted when replacing the fuse in the
moulded plug.
3. Do not cut off the mains plug from this equipment. If the plug
fitted is not suitable for the power points in your home or the cable
is too short to reach a power point, then obtain an appropriate
safety approved extension lead or adapter, or consult your dealer.
If nonetheless the mains plug is cut off, remove the fuse and
dispose of the plug immediately, to avoid a possible shock hazard
by inadvertent connection to the mains supply.
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code :
Blue: Neutral
Brown : Live
Do not connect those leads to the earth terminal of a three - pin plug
Safety precautions
*AC voltage selection
The AC voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Sefore
connecting the power cord to your AC outlet, make sure that the
setting position of this switcn matches your line voltage. If not, .t
must be set to your voltage in accordance with the following direction
AC voltage selector switch
AC 110-120V~ AC 220-240V~
Move switch lever to match your line valtage with
a small screwdriver or other pointed tool.
Note:
Our warranty does not cover darnage caused by excessive line voltage
due to improper setting of the AC voltage selector switch
A Caution : Read this section carefully to ensure safe operation.
WARNING :TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PERSONNEL.
CAUTION ()
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
PERSONS.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE” WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO
ACCOMPANYING THE APPLIANCE
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE
OF
IMPORTANT
OPERATING
AND
MAINTENANCE
(SERVICING)
INSTRUCTIONS
IN
THE
LITERATURE
rosocp/o4cp/103CD (En) 3