What to do if my Kenwood Stereo System isn't receiving radio stations?
If your Kenwood Stereo System isn't receiving radio stations, try these steps: * Connect the antennas. * Set the correct radio reception band (receiving mode). * Tune the frequency of the desired station.
Why is no music outputting from my Kenwood AS-IP70?
If you're not getting any audio from your Kenwood Stereo System, make sure the cords are properly connected and increase the volume.
What to do if my Kenwood Stereo System doesn't display preset stations?
If your Kenwood Stereo System is not displaying preset stations, try performing Auto Preset of radio stations again, or manually preset the radio stations of receivable frequencies.
What to do if my Kenwood AS-IP70 Stereo System has noise interference?
If your Kenwood Stereo System is experiencing noise interference: * Install the antenna away from the road. * Turn off any electrical equipment near the unit. * Keep the unit away from TVs.
What to do if my Kenwood AS-IP70 Stereo System doesn't play media from SD card/USB/iPod/iPhone?
If your Kenwood Stereo System isn't playing media from a connected SD card, USB flash memory, iPod, or iPhone: * Ensure the SD card/USB flash memory/iPod/iPhone is properly connected. * Verify the USB cable is correctly connected. * Confirm that the USB Mass Storage Class-compatible digital audio player is turned on.
Instructions for cleaning the product safely.
Guidance on using recommended attachments to avoid hazards.
Precautions against exposing the product to water or moisture.
Operating the product only from indicated power source types.
Explanation of the polarized plug safety feature.
Steps to prevent damage from lightning and power surges.
Avoiding overloading outlets and cords to prevent fire/shock.
Never push objects or spill liquids into the product.
Do not service the product yourself; refer to qualified personnel.
Conditions under which the product requires professional servicing.
Cautions to observe when installing the equipment, including the AC adapter.
Important steps before connecting or disconnecting cords and cables.
How to play music or view photos/videos from iPod/iPhone.
Procedure to set the current date (year, month, day).
Procedure to set the current time (hour, minute).
How to play music stored in iPod/iPhone.
How to set alarm timers to generate a buzzer or play audio at a reserved time.
Common symptoms and remedies for audio and clock problems.
Common symptoms and remedies for radio reception and noise interference.
Common symptoms and remedies for media playback issues.
Steps to reset the unit in case of malfunction.
General| Type | Stereo System |
|---|---|
| Brand | Kenwood |
| Model | AS-IP70 |
| Power Output | 20 W |
| Speaker Type | 2-way |
| Bluetooth | Yes |
| USB Port | Yes |
| FM Radio | Yes |
| Signal-to-Noise Ratio | 80 dB |
| Supported formats | MP3, WMA |
| Connectivity | USB |
| Speaker Impedance | 4Ω |
To Next Page
