To Next PageTo Next Page
Need help?Do you have a question about the Kenwood CMOS-230 and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Image sensor size | 1/3.6 \ |
| Minimum illumination | 0.9 lx |
| Vertical field of view | 103 ° |
| Connectivity technology | Wired |
| Horizontal field of view | 128 ° |
| Display included | No |
| Waterproof | Yes |
| Product color | White |
| International Protection (IP) code | IP67 |
Weight and Dimensions| Depth | 23.9 mm |
|---|---|
| Width | 23.4 mm |
| Weight | 21 g |
Critical safety advice to prevent injury, fire, and product damage during installation and operation.
Important notes on camera functionality, image quality, and maintenance advice.
A step-by-step guide for the physical installation process of the camera unit.
Critical warnings regarding wiring connections, fuse usage, and installation environment.
Precautions for proper installation, including surface preparation and avoiding obstructions.
Lists the included accessories provided with the camera kit.
Guidance on the optimal placement for installing the camera on the vehicle's rear.
Steps for mounting the camera and adjusting its viewing angle for best results.
Instructions for firmly tightening the camera's retaining screws after angle adjustment.
Steps for securely attaching the camera bracket using adhesive tape and screws.
Details on connecting the camera's video cord to the navigation system or video monitor.
Guidance on connecting the power cord and ground wire to the vehicle's electrical system.
Important cautions before making connections, such as disconnecting the battery.
Technical details of the camera, including video output, sensor, lens, and dimensions.
General operating parameters such as voltage, current consumption, and image mirroring.
Information on the proper disposal of old electrical equipment and batteries.
Statement regarding compliance with FCC rules for U.S.A. operations.
Cautionary advice regarding radio frequency energy and potential interference.
Notes on testing, limits for Class B digital devices, and interference correction measures.
