Need help?Do you have a question about the Kenwood CMOS-130 and is the answer not in the manual?
Provides guidance on cleaning and maintaining the camera unit and lens to prevent damage and ensure longevity.
Outlines the initial steps for installing the camera, including wiring and connections.
Illustrates and describes the correct placement of the camera on the rear of the vehicle for optimal viewing.
Details the steps for physically attaching the camera and fine-tuning its viewing angle for the desired perspective.
Illustrates the fundamental wiring diagram for connecting the camera to the video monitor and power source.
Lists technical parameters of the camera unit, including video output, sensor, lens, and dimensions.
Provides general operating voltage and current consumption details for the camera system.
Camera Specifications| sensor type | 1/4-inch color CMOS sensor |
|---|---|
| number of pixels | Approx. 380, 000 pixels |
| lens focal length | 1.12 mm |
| lens F value | 2.2 |
| horizontal angle of view | Approx. 129° |
| vertical angle of view | Approx. 104° |
| video output | 1.0 Vp-p/ 75Ω |
| illumination range | Approx. 0.9 to 100, 000 lux |
| iris system | Electronic iris |
| scanning system | Interlace |
| synchronizing system | Internal synchronization |
Power| operating voltage | 14.4V (9.0 V – 16.0 V) |
|---|---|
| max current consumption | 60 mA |
Weight and Dimensions| dimensions | 23.4 x 23.4 x 23.9 mm |
|---|---|
| weight | Approx. 21 g |
To Next Page
