To Next Page
M
markbrockSep 10, 2025
Why is my Kenwood DRV-A100 not charging?
- AAngela VillaSep 10, 2025
If your Kenwood Dash Camera is not charging, ensure the power cord is properly connected. When charging, the blue LED indicator should illuminate.
Why is my Kenwood DRV-A100 not charging?
If your Kenwood Dash Camera is not charging, ensure the power cord is properly connected. When charging, the blue LED indicator should illuminate.
What to do if SD card is not letting me view my files on Kenwood DRV-A100 Dash Cameras?
If your SD card files aren't viewable, try different card readers and computers. If none work, the files may be damaged. Format the memory card using your Kenwood device. Note that formatting will erase all saved files. Kenwood recommends branded Class 10 memory cards and formatting the SD card with the device for first-time use.
What does 'Card Full' mean on Kenwood DRV-A100 Dash Cameras?
A 'Card Full' message on your Kenwood Dash Camera indicates that your SD card has reached its maximum storage capacity. If you have protected files, they limit the memory card's available space. Try deleting unnecessary files to maximize the memory card's use.
Why do video files jump when played from Kenwood Dash Cameras?
Video files may jump during playback if you are not using a Class 10 SD card, which is recommended for best quality. If your computer doesn't recognize the video files, try viewing them on another computer. You can also copy the video file onto the computer and use the computer's video player instead of the device's playback feature.
Why is the video recording time short on Kenwood Dash Cameras?
If your Kenwood Dash Camera is only recording for a few minutes, it's likely that your SD card has very little available space. Back up all necessary files from the SD card, and then format the SD card using the device.
How to fix a 'Card Error' message on Kenwood Dash Cameras?
A 'Card Error' message means the SD card isn't correctly formatted for your device. To fix this, remove any files you want to keep and then format the SD card to allow it to function properly with your Kenwood Dash Camera.
What to do if I have unresolved issues with Kenwood Dash Cameras?
If you continue to have problems with your device, reset it to default settings in the setup menu and begin the process again.
What to do if SD card does not release from Kenwood Dash Cameras?
To release the SD card from your Kenwood Dash Camera, press the SD card forward until you hear a click. If it's stuck, use the edge of a small coin to push it forward until the click sound is made.
Why are photos blurry on Kenwood Dash Cameras?
If your photos are blurry, hold the Kenwood Dash Camera still while taking the photo, and ensure you hear the shutter click. Also, remove the protective lens cover and clean the lens.
Why is my Kenwood DRV-A100 not charging in the car?
If your Kenwood Dash Camera isn't charging in your car, first check your car’s power fuses. Also, inspect the power cord for any issues and replace it if necessary. The problem may be in cigar lighter adapter cable.
Explains the dashboard camera's features and modes of operation.
Important warnings and notices for safe operation and handling of the device.
Instructions and tips for maintaining the device's condition and longevity.
Guidelines for operating the device safely in various situations.
Procedures for cleaning the device and its lens properly.
Explains the functions of the device's physical buttons (Menu, Up/Mute, Record/OK, etc.).
Provides guidance on optimal placement for the dashboard camera in the vehicle.
Alerts users to important safety considerations during wiring and installation.
Guides users through the initial setup process, including language and time settings.
Explains the interface and icons visible during video recording.
General| Built-in display | Yes |
|---|---|
| Display diagonal | 2 \ |
| Product color | Black |
| GPS (satellite) | No |
| Languages support | CZE, DEU, DUT, ENG, ESP, FRE, ITA, POL, POR, RUM, RUS |
| Number of cameras | 1 |
| Main camera sensor | CMOS |
| Maximum frame rate | 30 fps |
| Aperture range (F-F) | 2.4 - 2.4 |
| Main camera resolution | 1280 x 720 pixels |
| Main camera sensor size | 1/4 \ |
| Main camera viewing angle | 125 ° |
| Video compression formats | AVI, M-JPEG, MPEG |
| Main camera sensor resolution | 1 MP |
| Cables included | USB |
| Quantity per pack | 1 pc(s) |
| Memory card included | MicroSD |
| Included memory card size | 16 GB |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 32 GB |
| Image formats supported | JPEG |
| Operating voltage | 5 V |
| Power source type | DC |
| Input operation voltage (max) | 24 V |
Weight and Dimensions| Depth | 58 mm |
|---|---|
| Width | 54 mm |
| Height | 37 mm |
| Weight | 46 g |
