To Next PageTo Next PageWhy are my Kenwood Dash Cameras photos blurry?
If the photos from your Kenwood Dash Cameras are blurry, hold the device still while taking the photo, ensuring you hear the shutter click. Also, make sure the protective lens cover is removed and the lenses are clean.
What to do if a malicious software message appears when downloading from Kenwood website?
If you encounter a malicious software message when downloading files from the KENWOOD website, adjust your browser settings to allow the download to proceed. After the download is complete, reset your browser security settings to protect your computer.
How to delete files on Kenwood DRV-A601WDP?
If you can't delete a file on your Kenwood Dash Cameras device, ensure the file is unprotected. If it is protected, follow the instructions on page 31 to unprotect the file before attempting to delete it.
What to do if SD card does not release from Kenwood DRV-A601WDP Dash Cameras?
To release the SD card from the Kenwood Dash Cameras device, press the SD card forward until you hear a small click. If you can't remove it, use the edge of a small coin to push it forward until the click sound is made.
Why can't I play Kenwood DRV-A601WDP Dash Cameras video files?
If video files from your Kenwood Dash Cameras cannot be played, it's because the device records video files in .MOV format. You may need to install a suitable video player on your computer to play these files.
Why does my Kenwood DRV-A601WDP Dash Cameras screen turn off quickly?
If your Kenwood Dash Cameras screen turns off shortly after turning it on, the screen saver function is likely activated. To disable it, go to SETUP menu -> Screen Saver and turn it off.
Why can't I save Kenwood DRV-A601WDP video files to my computer via USB?
If you cannot save video files to your computer via USB from your Kenwood Dash Cameras, reboot your computers. Ensure the device is properly connected, as the functions are optimized for both Windows and Mac computers.
How to insert SD card in Kenwood DRV-A601WDP?
When inserting the SD card into your Kenwood Dash Cameras, make sure the metal portion of the memory card faces the screen side. Once inserted, push the card until you hear a CLICK sound.
Why is my Kenwood DRV-A601WDP Dash Cameras not charging?
If your Kenwood Dash Cameras device isn't charging, ensure the power cord is properly connected. When charging, the blue LED indicator should light up.
What to do if a 'Card Full' message appears on Kenwood DRV-A601WDP Dash Cameras?
If a “Card Full” message appears on your Kenwood Dash Cameras device, it means your SD card has reached its maximum storage capacity. Keep in mind that protected files reduce the available space on your memory card. To resolve this, delete any unnecessary files to maximize the usable space on your SD card.
Guidelines for maintaining the device to ensure trouble-free operation.
Important considerations for correctly installing the device in a vehicle.
Warnings and advice for safe and effective operation of the device.
Explains icons and functions in video recording mode.
Explains icons and functions in photo capture mode.
How to review, protect, and delete recorded videos and photos.
Steps for pairing the smartphone app with the dash cam.
General| Video Resolution | 1920 x 1080 |
|---|---|
| Frame Rate | 30 fps |
| Viewing Angle | 140 degrees |
| Screen Size | 2.7 inches |
| GPS | Yes |
| G-Sensor | Yes |
| Wi-Fi | Yes |
| Parking Mode | Yes |
| Rear Camera | Yes |
| HDR | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| Rear Camera Resolution | 1920x1080 |
| Storage | MicroSD card (up to 128GB) |
