Kenwood CMOS-310 User Manual

CMOS-310
CMOS-210
UNIVERSAL MULTI-VIEW CAMERA/ UNIVERSAL REAR VIEW CAMERA
INSTRUCTION MANUAL
CAMÉRA MULTI-VUES UNIVERSELLE/ CAMÉRA DE RECUL UNIVERSELLE
MODE D’EMPLOI
UNIVERSAL MULTIVIEW-KAMERA/ UNIVERSAL RÜCKFAHRKAMERA
BEDIENUNGSANLEITUNG
UNIVERSELE MULTIVIEWCAMERA/ UNIVERSELE ACHTERUITRIJCAMERA
GEBRUIKSAANWIJZING
TELECAMERA MULTIVISIONE UNIVERSALE/ TELECAMERA PER RETROMARCIA UNIVERSALE
ISTRUZIONI PER L’USO
CÁMARA DE MULTIVISIÓN UNIVERSAL/ CÁMARA DE VISTA TRASERA UNIVERSAL
MANUAL DE INSTRUCCIONES
CÂMARA MULTIVISÃO UNIVERSAL/ CÂMARA TRASEIRA UNIVERSAL
MANUAL DE INSTRUÇÕES
通用多图像摄像头/通用后视摄像头
使用说明书
B64-4963-08/00 (W)
© 2011 JVC KENWOOD Corporation
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new Universal Camera.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty
card, and in the space provided below. Refer to the model and serial numbers whenever you call
upon your Kenwood dealer for information or service on the product.
Model CMOS-310/CMOS-210 Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
   

Kenwood CMOS-310 Specifications

General

Brand	Kenwood
Model	CMOS-310
Category	Dash Cameras
Language	English

Summary

Before Use and Installation Procedure

Care and Maintenance

Guidance on cleaning and maintaining the product to prevent damage.

Installation Procedure

Step-by-step instructions for installing the camera unit in a vehicle.

Installation

Recommended Installation Position

Illustrates optimal placement positions for the camera on a vehicle.

Installing the Camera and Adjusting its Angle

Detailed steps for physically mounting the camera and adjusting its viewing angle.

Connections

Basic Connections

Diagram and explanation of the fundamental wiring for connecting the camera system.

System Connection (CMOS-310 only)

Details on connecting the CMOS-310 camera to a navigation system for advanced control.

Connection of 2 Cameras

Wiring configuration for using two CMOS-310 cameras, e.g., front and rear.

Camera Setting (CMOS-310 only)

Switch Unit Operation

Preparation Before Camera Setting

Camera Setting Procedure

Step-by-step guide to adjust camera settings like image positioning and guidelines.

Overhead View Image Adjustment (Centering)

Overhead View Image Adjustment (Right-and-Left Angle)

Overhead View Image Adjustment (Up-and-Down Angle)

Wide View Guideline Adjustment (Size)

Wide View Guideline Adjustment (Horizontal Direction)

Wide View Guideline Adjustment (Vertical Direction)

Wide View Guideline Adjustment (Red Line Position Setting)

Camera ID Setting