Need help?Do you have a question about the Kenwood DA-9010 and is the answer not in the manual?
General| Power output | 150 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency response | 20Hz to 20kHz |
| Total harmonic distortion | 0.008% |
| Damping factor | 80 |
| Input sensitivity | 1mV (mic), 2.5mV (MM), 200mV (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 440 x 162 x 414mm |
| Weight | 14.2kg |
| Signal to noise ratio | 100dB (line) |
Record serial number and model for service reference.
Instructions for careful unpacking and checking for shipping damage.
List of included accessories.
Crucial warnings and precautions before connecting power.
Comprehensive safety guidelines for operation and environment.
Diagram and instructions for connecting analog audio/video sources.
Diagram and instructions for connecting digital audio sources.
Details on speaker connection, impedance, and AC outlet usage.
Identification and function of front panel controls and indicators.
Adjusting volume, tone controls, and using the muting function.
How to select and play analog sources like tuner, phono, and CD/VDP1.
How to select and play digital sources.
Steps for recording analog and digital audio sources.
Instructions for recording AM/FM radio broadcasts.
How to dub audio between tape decks.
Performing tape-to-tape dubbing from analog or digital sources.
Overview of buttons and their functions on the remote control.
How to install batteries and the operational range of the remote.
Solutions for problems encountered during listening and playback.
Explanation of the speaker protection circuit function and reset.
Detailed technical data including power output, impedance, and dimensions.
To Next Page
